- New
ORGANIC ACID (POWDER)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
Descalex powder is used for to remove deposits on the Aluminium, copper, zinc surfaces, galvanized metals, steel boilers, cooling systems, ejection machines, condense lines and climate systems. It does no harm to metal surfaces. If the system is infected with oil, gyres or carbonic oil, make a pre-cleaning with ER-APC in order to remove them.
For circulation method use 5-10 Kg Descalex powder with 100 ltr water. For immersion method use 1-1,5 Kg Descalex powder with 9 ltr water. For better results use water, heated up to 55-60 ˚C in the solution. The cleaning procedure must continue for 24 hours. After the cleaning rinse the cleaned surfaces very effectively or you may use ERAY in %1 solution to neutralize Descalex powder.
WORKING CONDITIONS SHOULD CONSIDER of the ISSUES:
R-34 can cause burns.
S-45 In case of accident or you do not feel good, seek medical advice immediately.
S-26 In case of contact with eyes, rinse with plenty of water and seek medical advice immediately.
S-27 This is contaminated clothing should be removed immediately.
S-36/37 suitable protective clothing while you work, use protective gloves.
S-39 employees when the appropriate protective eye / face use.
S-62 Do not induce vomiting if swallowed victim. Immediately refer to the first aid service, show the label.