RUST REMOVER

RUST REMOVER, iron and steel surfaces to remove rust and rust stains by forming a bright surface is a mixture of acid concentrate product. Worn surfaces of 50% should be clean with RUST REMOVERsolution. Dirty little worn and stained surfaces, copper and brass in the decision-50 RUST REMOVER solution should be applied 15-30 minutes and the surface should be washed with water. 10% Aluminum-RUST REMOVER solution 25'lik max. 5 minutes should be applied 15-30 minutes and should be washed with surface water. In ceramic tiles, enamel surfaces, porcelain-40 RUST REMOVER 20% solution should be applied 15-30 minutes and the surface should be washed with water. Stainless steel and epoxy coated tanks which light rust,% 5-RUST REMOVER solution with a 15 to be cleaned. 

TYPICAL PHYSICAL PROPERTIES: 

CHEMICAL PACKAGING AND STORAGE OF MATTER: 
Packaging shape, 25-30 Kg. in sealed plastic bins and storage lık period is 2 years. 


WORKING CONDITIONS SHOULD CONSIDER of the ISSUES: 
R-34 can cause burns. 
S-45 In case of accident or you do not feel good, seek medical advice immediately. 
S-26 In case of contact with eyes, rinse with plenty of water and seek medical advice immediately. 
S-27 This is contaminated clothing should be removed immediately. 
S-36 / 37 employees when appropriate protective clothing, protective gloves. 
S-39 employees when the appropriate protective eye / face use. 
S-62 Do not induce vomiting if swallowed victim. Immediately refer to the first aid service, show the label.